Hybrid Overhead + Mixer Bundle


incl. VAT, incl. shipping costs

Delivery time 1-2 days

  • 1006941

drum-tec Hybrid Overhead + Mixer Bundle

The perfect solution to integrate a low noise cymbal set (like Agean, Zildjian Gen16, L80, Aborea, Sabian Quiet Tone, ...) with your e-drums for a beautiful hybrid drumming experience!

You deliberately chose an e-drum set for its versatility and low noise environment but you do not want to miss hitting warm sounding cymbals with authentic rebound? You enjoy building your hybrid drumming setup to suit your personal needs and ponder how to best merge the sounds from both the acoustic and the electronic realms into one unified world? We got you! We at drum-tec have the answer to your problem.

Our team tapped into our combined experience and created this overhead & mixer hybrid solution to fill the gap between a pure e-drum and an acoustic cymbal set. With the components we carefully selected you can capture the spectrum of warm sounds from beautiful cymbals (like the low noise cymbals from the Agean R series). This audio stream will be mixed in with the sounds of your e-drum module in the discrete mixing unit: a small and highly effective setup!

We selected the condenser microphones from RODE to be mounted on the Adam Hall microphone stands for a sturdy and stable footing. The mics will be connected with the high-grade t&m microphone cables for unaltered sounds. All A/E signals will be mixed inside the Yamaha MG06X mixer, which we specifically selected for this purpose. The result is stunning! Additionally, you have the option to manipulate the sounds by using the six different effects programs from the SPX effects processing unit.

Naturally, we also added two audio cables (6,3mm standard jack) to connect your sound module to the mixer.

1x Yamaha MG06X 6 channel mixer

The Yamaha MG06X analog mixer is well-suited for ultra-compact mixing rigs, with its rich features and outstanding sound quality. The MG06X's quality op-amp ensures that your mix sounds transparent and articulate. The MG06X's crystal clear D-PRE preamps will squeeze every drop of tone from your mics, with natural-sounding bass and smooth highs. Featuring onboard digital effects, switchable phantom power, a pad switch, EQ, and LED metering, the MG06X can take on just about any task you throw at it. Utilizing many state-of-the-art features from Yamaha's high-end consoles, the MG06X is ready to work for you!

  • D-PRE discrete Class-A mic preamps deliver clean and natural sound
  • EQ and highpass filters allow for effective sound-shaping
  • Built-in SPX digital effects add polish and professionalism
  • High quality op-amp ensures transparent sound reproduction
  • Channels: 6 Inputs
  • Mic Preamps: 2 x Combo (XLR/TRS)
  • Phantom Power: 2 Inputs -
  • Line: 2 x TRS
  • 2 x TS Outputs - Main: 2 x XLR, 2 x TRS
  • EQ Bands: 2-Band EQ (High, Low)
  • measrures 149 x 62 x 202 mm
  • weight: 0,9 kg

2x RODE M5 Compact 1/2" Condenser Microphone

The M5 is a versatile condenser microphone for the stage and studio. Its compact dimensions, excellent frequency response, switchable low cut and level attenuation make this microphone ideal particularly for the transmission and recording of acoustic instruments. Suitable for acoustic guitar, percussion instruments, drum overhead/hi hat, violin and piano.

  • Acoustic Principle: Pressure Gradient
  • Active Electronics: JFET impedance converter with bipolar output buffer
  • Polar Pattern: Cardioid
  • Frequency Range: 20Hz ~ 20kHz
  • Output Impedance: 200O
  • Equivalent Noise: 19 dBA SPL (as per IEC651)
  • Maximum Output Level: +13.5 dBu
  • Sensitivity: -34 dB re 1V/Pa (20mV @ 94 dB SPL) ± 2dB @ 1kHz
  • Dynamic Range: 121 dB SPL
  • Maximum SPL: 140 dB SPL
  • Signal to noise Ratio: 75 dBA SPL (as per IEC651)
  • Power Requirements: 24V phantom power / 48V phantom power
  • Output Connection: 3 Pin XLR, Balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
  • Weight: 80.00g
  • Dimensions: 100.00mmH x 20.00mmW x 20.00mmD

2x Adam Hall S6B Microphone stand with boom arm

Microphone stand black, telescopic boom arm, plastic-covered metal base with folding legs

  • Tubing material steel
  • Tubing colour Black
  • Tubing surface powder coated
  • Min. height 940 mm
  • Max. height 1600 mm
  • Base material Cast iron
  • Boom length 500 - 800 mm
  • Weight 1,9 kg
  • with extendable boom

Fitting cable bundle including:

  • 1x t&m XLR cable 3 meters
  • 1x t&m XLR cable 5 meters
  • 2x Audio cable 3 meters plug/plug

Reviews 0
Share your feedback!
Please enter these characters into the following text field.

The fields marked with * are required.

Customers also bought